DuraLabel PRO Supplies

Without the necessary supplies, even the best label printer has little value. The DuraLabel PRO 300 and the DuraLabel 7000 and 9000 have a wide variety of supplies available--it is an outstanding labeler for making NFPA 70E Arc Flash labels, as well as for taking on just about any other labeling job in your facility.

Plus with every order you place for DuraLabel supplies, you'll receive a free gift! Every order includes FREE candy! If your order is over $500, when you place your order ask your customer service representative about special additional gifts. Call today to order DuraLabel PRO supplies.

DuraLabel Vinyl Tapes for Arc Flash Labels

Vinyl tapes are available in widths from 1/2" up to 9 " and in two thicknesses, 2.0 mil and 3.0 mil. The 3.0 mil tapes provide heavy-duty, durable labels. These are the tapes that are normally used for making labels and signs. The 2.0 mil tapes provide greater flexibility for labels that need to conform to curved and irregular surfaces. DuraLabel PRO vinyl tapes are available in over 60 colors--more colors than any other label printer. DuraLabel vinyl tapes are industrial-grade, chemical resistant, durable indoor/outdoor vinyl that lasts for years!

Low-temperature vinyl tapes, made with special adhesives, are also available. Labels made with these tapes may be applied at temperatures below freezing. They are typically used in cold-storage facilities, but may also be used when labels need to be applied during the winter.

DuraLabel Die-Cut Arc Flash Labels

NFPA 70E Arc Flash die-cut labels are available for use with the arc flash software included with the DuraLabel.

DuraLabel die-cut arc flash labels come in 4" x 6" and 7" x 11" sizes and come on 4" wide rolls. They are available with either a DANGER header or a WARNING header. Both types are shown to the right.

The WARNING labels come with a pre-printed orange header. The DANGER labels come with a pre-printed red header.

Labeling Hazardous Materials: Die-cut labels are also available for making RTK labels in a variety of sizes and formats. Both NFPA diamond labels and color bar labels are available. NFPA diamond labels are available in sizes from 2" x 2" up to
4" x 6". Color bar labels are available in 2" x 2" and 3.5" x 4" sizes. All die-cut RTK labels are adhesive backed, chemical resistant, industrial quality vinyl. Database software for printing die-cut RTK labels is included with the DuraLabel Pro.

Blank die-cut labels are available with either a DANGER header or a NOTICE header.
These labels are 4" x 6" to 7" x 11" in size.

The red and black DANGER header is pre-printed on the die-cut label. Templates are provided with the DuraLabel Pro for easily printing your customized information in the white space on the label.

The die-cut NOTICE labels have a pre-printed blue and white header. The DuraLabel PRO and the DuraLabel 7000 and 9000 allow you to completely customize your signs and labels, and the industrial-quality, adhesive-backed vinyl will last for years in harsh environments.

Wire and Cable Labeling

Both shrink tube labels and self-laminating wire wraps are available for the DuraLabel.

Shrink tube labels are made from polyolefin. They are sleeves that, after being printed, slip over the end of the wire. They are then heated and shrink to a tight fit. Self-laminating wire wraps have a printable opaque area and a clear tail that wraps around the wire or cable to cover and protect the printed portion of the label.

Give us a call at 1-888-326-9244 for more information about wire and cable marking supplies.

Specialty Labeling Supplies

A variety of other specialized labeling supplies are available for the DuraLabel PRO.

Reflective tapes are available in 18 colors. They provide high visibility labels that are excellent for low light conditions. Reflective indoor/outdoor, adhesive-backed vinyl comes in 2-packs of 75 ft. rolls. The standard widths are 4", 3", 2", 1" and 1/2".

Phosphorescent vinyl tapes will glow in the dark for hours after a light source has been removed. In any low-light environment, phosphorescent labels and signs can help you increase safety and decrease accidents. This glow-in-the dark vinyl is great for marking walkways, exits, fire extinguishers, stairways, corridors or any other potential safety hazards created by loss of light. Phosphorescent, adhesive-backed vinyl comes in 50 ft. rolls. The standard widths are 4", 2", 1" and 1/2".

Valve tags make your facility safe by eliminating confusion, reducing search time and cutting down the potential for accidents. A valve tag consists of a sturdy plastic tag to which a standard vinyl label is attached. DuraLabel printers allow you to easily and inexpensively create customized valve tags for your facility. Quickly make your valve tags in a variety of colors and sizes directly from your PC!

Other Specialty Supplies--we are continually developing new supplies for the DuraLabel line of printers, so if there is something you need, please give us a call. There are more types of DuraLabel supplies than we can describe here. For example, DuraLabel Speciality Supplies include:

• Tamper Evident Tapes
• ESD (Electrostatic Dissipative) Tapes
• HI-Tack Tapes (Tapes with super sticky adhesive)
• Oily Surface Tapes (Tapes that can be applied to an ouily surface)
• Hi Temperature Poly Tapes
• Metalized Labels

DuraLabel Supplies - More Information

If you'd like to know more about DuraLabel supplies, or need to place an order, please give us a call at the number at the bottom of this page. Or, if you prefer, use the blue button below to contact us by email 24-7. We typically respond to emailed questions and requests within one business day.