Monday, September 15, 2008
Understanding Ground Fault Protection
There is a good article by Ken Cybart of Littelfuse in today's Plant Engineering Live. It provides an overview describing ground fault monitors. The article begins by discussing the causes of ground faults:"Simply put, a ground fault occurs when electrical current finds a bridge to ground via worn insulations, conductive dusts, water or other “soft grounds,” instead of the normal path back to its source. More than 80% of short circuits in equipment are ground faults, and 90% of these events are due to insulation deterioration on wires and cables."
The article then discusses Ground Fault Circuit Interrupters (GFCIs) and Ground Fault Relays (GFRs). You can read the complete article at: http://www.plantengineering.com/
Labels: Electrical Safety, Preventing Arc Flash Accidents
posted by Steve Hudgik
| This Arc Flash Post and 0 Comments
| 
NFPA 70E Blog | Arc Flash Labels | Arc Flash Label Printers | DuraLabel Supplies | Arc Flash Quiz
0 Comments:
Post a Comment
Links to this post:
Create a Link
<< Home